T CLEAR
Concrete Building Envelope and Roofing Products
Protected Membrane Roof Systems – HeavyGUARD or LightGUARD to achieve both insulation and ballast for your low slope roofing needs.
For your non-structural sheathing and continuous insulation requirements look at our ProGUARD Concrete Insulated Sheathing panels or ProGUARD DP Insulated Concrete Boards, which not only provide insulation and protection, but are also a perfect substrate for any type of exterior finish.
To protect and insulate around your slab edge or rim joist see our WallGUARD Concrete Faced Insulated Perimeter Wall Panels, which are designed to be used above and below grade.
For your foundation or basement walls look for our ThermaDRY Insulating Drainage Panels, which insulate and protect your concrete walls while providing drainage to move ground water away.
FEATURED PRODUCT
HeavyGUARD
HeavyGUARD panels provide both insulation and heavyweight ballast in one easy step for Protected Membrane Roof Systems. Panels are composed of 2 or 3 inches of Dow Styrofoam with a 15/16-inch latex-modified concrete topping on a 2’x4′ tongue-and-groove panel, weighing 11 lb. per square foot per panel. HeavyGUARD panels are perfect for rooftop gardens and light-traffic decks.
Protects roof membrane from UV degradation
Reusable and recyclable
Labor Saving
Reduce yearly membrane maintenance costs
ThermaDRY – Insulating Drainage Panels
ThermaDRY 2’x8′ Insulating Drainage Panels are manufactured using 2″ Dow Styrofoam extruded polystyrene or expanded polystyrene, with one side having vertical and horizontal channels cut into the panel and a factory-applied filter fabric adhered over the channels. The spunbonded geotextile filtration fabric helps prevent soil from entering and clogging the drainage channels. This fabric also overlaps the sides and ends of the panels. This prevents the edge channels from being clogged at the panel joints.
Cap Flashing for WallGUARD
WallGUARD Cap Flashing is comprised of a UV stable rigid PVC cap flashing designed specifically for WallGUARD Concrete Faced Insulated Perimeter Wall Panels. The use of PVC results in no thermal bridging so the flashing will not take away from the insulation value of the WallGUARD panels or the wall assembly.
The PVC design includes a drip edge to keep water from running down the face of the panels as well as providing for an aesthetically pleasing gray color that closely matches the natural color of the concrete facing on the WallGUARD panels.
WallGUARD – Concrete Faced Insulated Perimeter Wall Panels
WallGUARD insulates and protects areas from just below grade to where your heat lost begins around the exposed area of your building foundation. Around the slab edge or rim joist is an area that can account for 10% or more of your total heat loss. WallGUARD stops that heat loss and provides a durable latex modified concrete finish that can stand up to accidental impact. WallGUARD comes standard in a gray concrete, but can be coated on-site to provide a color or texture match to your exterior design features.
WallGUARD is manufactured using Dow Styrofoam extruded polystyrene insulation, with a factory-applied 5/16-inch latex-modified concrete coating. Panels are 2’x4′ with tongue-and-groove edges on the 4′ length. WallGUARD comes in either 2″ (R-10) or 3″ (R-15) thicknesses of Dow Styrofoam and is attached with a hidden clip system that is provided with each pallet of product.
ProGUARD – Non-Structural Concrete Insulated Sheathing
ProGUARD Concrete Insulated Sheathing wall panels consist of a lightweight non-structural, impact-resistant concrete backerboard sheet laminated to a continuous layer of rigid insulation providing a wall system that installs faster than conventional building techniques.
ProGUARD Concrete Insulated Sheathing Panels also provide superior thermal protection with shiplapped edges that eliminate thermal breaks, which meet ASHRAE 90.1 Continuous Insulation requirements. All joints are sealed with acrylic waterproofing and fiberglass mesh, providing an airtight seal.
HeavyGUARD – Protected Membrane Roof Panels
HeavyGUARD panels provide both insulation and heavyweight ballast in one easy step for Protected Membrane Roof Systems. Panels are composed of 2 or 3 inches of Dow Styrofoam with a 15/16-inch latex-modified concrete topping on a 2’x4′ tongue-and-groove panel, weighing 11 lb. per square foot per panel. HeavyGUARD panels are perfect for rooftop gardens and light-traffic decks.
LightGUARD – Protected Membrane Roof Panels
LightGUARD panels provide both insulation and heavyweight ballast in one easy step for Protected Membrane Roof Systems. Panels are composed of 2 or 3 inches of Dow Styrofoam with a 3/8-inch latex-modified concrete topping on a 2’x4′ tongue-and-groove panel, weighing 4.5 lb. per square foot per panel.